FSM200LT/10PPM

The current sensor using the Hall effect closed-loop principle can measure DC, AC, pulse and various irregular waveforms of current under the condition of electrical isolation.

Send Inquiry

Download

Product Introduction

产品特性 Product characteristics

磁通门技术,高精度,高稳定性电流测量 Fluxgate technology, high precision, high stability current measurement

应用于非接触式场合,易于安装 For non-contact applications, easy to install

极低的温度系数 Very low temperature coefficient

低偏置电流 Low bias current

具有饱和检测及自恢复功能 It has the function of saturation detection and self-recovery

高带宽,最高可达DC~800kHz(@±3dB) High bandwidth, up to DC~800kHz(@±3dB)

应用领域 Application field

新能源领域：锂电池化成分容,电池充放电测试系统反馈器件,电机测试等

New energy field: lithium battery components, battery charging and discharging test system feedback devices, motor testing, etc

粒子加速领域：高准确度电源的采样反馈器件

Particle acceleration field: Sampling feedback devices for high accuracy power supplies

医疗行业：MRI的电源采样反馈

Medical industry: Power sampling feedback for MRI

轨道交通领域：变流器等高准确度,大电流的测试

Rail transit field: converters and other high accuracy, high current testing

实验室应用：配合功率分析仪进行高准确度功率测量,对计量级别电流进行可靠测试

Laboratory application: High accuracy power measurement with power analyzer, reliable testing of metering level current

仪器仪表领域：仪器仪表中电流测量的反馈器件

Instrumentation field: Feedback devices for current measurement in instrumentation

安全特性 Safety feature

参数 (Parameter)	符号 (Symbol)	单位 (Unit)	最小 (Min)	标称 (Type)	最大 (Max)	备注 (Comment)
参数 (Parameter)	符号 (Symbol)	单位 (Unit)	最小 (Min)	标称 (Type)	最大 (Max)	备注 (Comment)
耐受电压 Withstand voltage	U_d	kV	--	2.5	--	50/60Hz,1min
瞬态隔离电压 Transient isolation voltage	T_S	kV	--	5	--
相对漏电起痕指数 Relative leakage marking index	CTI	V	--	600	--	无冷凝

一般特性 General feature

参数 (Parameter)	符号 (Symbol)	单位 (Unit)	最小 (Min)	标称 (Type)	最大 (Max)	备注 (Comment)
参数 (Parameter)	符号 (Symbol)	单位 (Unit)	最小 (Min)	标称 (Type)	最大 (Max)	备注 (Comment)
工作温度范围 Operating temperature range	T_A	℃	-25	--	60
储存温度范围 Storage temperature range	T_S	℃	-40	--	85
相对湿度 Relative humidity	RH	%	10	--	80	无冷凝
质量 Quality	m	kg	--	0.1	--

电参数/Electrical characteristics

测试条件(环境温度25℃,供电电压±24V)Test conditions (ambient temperature 25℃, supply voltage ±15V)

参数 (Parameter)	符号 (Symbol)	单位 (Unit)	最小 (Min)	标称 (Type)	最大 (Max)	备注 (Comment)
参数 (Parameter)	符号 (Symbol)	单位 (Unit)	最小 (Min)	标称 (Type)	最大 (Max)	备注 (Comment)
额定原边直流电流 Rated primary DC current	I_PN _DC	A	-200	--	200
额定原边交流电流 Rated primary AC current	I_PN	A	--	--	141
测量范围 Measuring range	I_PM	A	-200	--	200
测量电阻 Measuring resistance	R_M	Ω	0	--	25
副边电流 Secondary side current	I_S	mA	-100	--	100
过载能力^① Overload capacity ①		A	-1000	--	1000	@100ms脉冲
电流变比 Current ratio	K_N		--	1:2000	--
供电电压 Supply voltage	U_C	V	±14.25	--	±15.75
电流消耗 Current consumption	I_C	mA	--	--	50	总消耗需累计I_S
输出噪声0…10Hz^② Output noise 0... 10Hz②	V_no	ppm	--	--	5
输出噪声0…100Hz^② Output noise 0... 100Hz②			--	--	10
输出噪声0…1kHz^② Output noise 0... 1kHz②			--	--	50
零点失调电流^② Zero offset current ②	I_OE	%	-0.01	--	0.01
温度漂移系数^② Temperature drift coefficient	TCI_OE	ppm/K	-10	--	10
零点偏置稳定性^② Zero bias stability ②		ppm/month	-25	--	25
线性度^② Linearity	ε_L	ppm	-10	--	10
总体准确度^② Overall accuracy	X_G	%	-0.01	--	0.01
电流跟随速度 Current following velocity	di/dt	A/μs	100	--	--
带宽(±3dB) Bandwidth (±3dB)	BW	kHz	--	200	--	小信号,@0.5%I_PM
注①:测试信号为单脉冲,过冲后传感器会进入自恢复状态,状态指示灯灭,需要约50ms恢复到正常工作状态. Note 1: The test signal is a single pulse. After overshooting, the sensor will enter the self-recovery state, and the status indicator will be off. It takes about 50ms to restore to the normal working state.
注②:ppm数据均参考副边输出信号满度对应的I_PN. Note 2 :ppm data refer to IPN corresponding to the subside output signal full degree. 传感器机械尺寸图 Mechanical dimensions of the sensor 单位：mm Unit：mm

Hot Tags: FSM200LT/10PPM, China FSM200LT/10PPM manufacturers, suppliers, factory, Detection and Measurement Light Curtain, Waterproof Remote Display, Closed Loop Hall Effect Current Sensor, Open Loop Hall Effect Current Sensor, Safty Protection Divice, Double ended Beam Load Cell

FSM300LTB/W5

No Information