KP10

This product is a current sensor, which is an open-loop current sensor developed by the principle of electromagnetic induction. In the case of galvanic isolation of the primary and secondary sides, current signals in the form of DC, AC and pulses can be accurately measured. Low power consumption, small size, excellent frequency response characteristics.

Send Inquiry

Download

Product Introduction

◆产品描述 /Product Description

产品特点

应用

· 低噪声Low noise

· 良好的线性Good linearity

· 小型的PCB安装方式Compact PCB mounting,

· 低磁滞Low hysteresis

· 具有良好的过流能力It has good overcurrent capability

· 逆变器inverter

· 直流供电设备DC power supply equipment

· 数控机床CNC machine tools

◆电参数/Electrical characteristics

	型号 Type	KP10-50A	KP10-100A	KP10-150A	KP10-200A
I_pN	原边额定输入电流 Primary nominal input current	50	100	150	200	A
I_p	原边电流测量范围 Measuring range ofprimary current	0~±100	0~±200	0~±300	0~±400	A
V_sN	副边额定输出电压 Nominal output voltage	4±1%				V
V_c	电源电压 Supply voltage	±12~±15(±5%)				V
I_c	电流消耗 Current consumption	Vc =±15V <20				mA
V_a	绝缘电压 Insulation voltage	在原边与副边电路之间2.5KV有效值/50Hz/1分钟 2.5KV RMS /50Hz/1 min between primary and secondary side circuits
e _L	线性度 Linearity	<1				%FS
V_₀	零点失调电压 Offset voltage	TA=25℃ <±25				mV
V_ow	磁失调电压 Residual voltage	Ip→0 <±25				mV
V_or	失调电压温漂 Thermal drift of V0	Ip=0 TA=-25～+85℃ <±2				mV/℃
T_r	响应时间 Response time	≤3				μ s
f	频带宽度(-3dB) Frequency bandwidth(-3dB)	DC～50				kHz
T_A	工作环境温度 Ambient operating temperature	-10～+80				℃
T_s	贮存环境温度 Ambient storage temperature	-15～+85				℃
R_L	负载电阻 Load resistance	≥10K				Ω
	标准 Standard	GI/FS-0105

◆外形尺寸(mm)/Dimensions of drawing(mm)

product-931-874

使用说明/Remarks

1.错误的接线可能导致传感器损坏.传感器通电后,当被测电流从传感器箭头方向穿过,即可在输出端测得同相电压值.Incorrect wiring may cause damage to the sensor. After the sensor is powered on, when the measured current passes through the arrow direction of the sensor, the in-phase voltage value can be measured at the output end.

2.传感器的输出幅度可根据用户需求进行适当的调节.

The output amplitude of the sensor can be adjusted according to the user's needs.

3.可按用户需求定制不同额定输入电流和输出电压的传感器.

Sensors with different rated input current and output voltage can be customized according to user requirements.

Hot Tags: kp10, China kp10 manufacturers, suppliers, factory, Hall Effect Sensor SZ4131, Current Sensor SLD1 P, Electric Vehicle Snesor SP2106D5, General Safety Light Curtain, NTEP Load Cell, Closed Loop Hall Effect Sensor SC160T

No Information

FSV3000EVT2