Hall Effect Current Sensor SZ1KD12
SZ1KD12(001)
SZ1KD12-2(001)

Hall Effect Current Sensor SZ1KD12

SZ1KD12-200A is split core hall-effect current transducer。Easy to install, clamp to measured conduct(cable or busbar) by opening transducer, suitable for the conditions where could not move measured conduct. Could test DC,AC and pulse current.

Send Inquiry

Product Introduction

FEATURES

Open loop hall-effect technology
Split core design
Primary nominal current：50A~500A
Ambient temperature ：-20℃~60℃

APPLICATIONS

AC variable speed and servo motor drive
DC motor drive static converter
Wielding machine
Telecom power supply
UPS
Switch power supply

ELECTRICAL DATA(Ta=25℃±5℃)

Parameter	symbol	unit	Min.	typical	Max.	condition
Nominal primary current	Ipn	A	-200	-	+200	-
Peak current	Ipm	A	-250	-	+250	-
Nominal output	Vsn	V	0.5	2.5	4.5	-
Supply voltage	Vc	V	+10.8	+12	+13.2	-
Current consumption	Ic	mA	-	-	25	@ Vc=+12V, Ipn=0A
Load resistance	RL	KΩ	10	-	-	-
Overall accuracy	X	%FS	-1	-	+1	@Ta=25℃
linearity error	ε	%FS	-1	-	+1	@Ta=25℃
Electrical zero offset	Vo	V	2.490	2.5	2.510	@Ip=0，TA=25℃
Magnetic zero offset	Voh	V	2.490	2.5	2.510	@Ip= Ipn→0
Thermal drift of Vo	Vot	mV/℃	-1	-	+1	@Ip=0, TA=-20～60℃
Thermal drift of Vsn	Vt	mV/℃	-3	-	+3	@Ip= Ipn, TA=-20～60℃
Response time	Tr	mS	-	-	20	@50A/mS, 10%-90%
Ambient operating temperature	TA	℃	-20	25	+60	-
Storage temperature	TS	℃	-40	25	+85	-
Mass	G	g	-	-	76	_
Insulation voltage	Vd	KV	-	3	-	@ 50HZ，AC，RMS，2mA,1min
Surge voltage	Surge	V		-	1000V	@ IEC61000-4-5
Insulation resistance	Ris	MΩ	-	100	-	@ 500VDC
Creepage distance	dCp	mm	-	20	-	Terminal to inner hole
Clearance distance	dCi	mm	-	20	-	Terminal to inner hole